80790 Hammond Highway    Madelia, MN 56062 1-800-400-3946             1-507-642-3543

The PHASE-O-MATIC rotary converter is a low cost method of producing three-phase power from a single-phase line.  The converter, resembling an electric motor, is designed to operate as a three-phase distribution system for farms, factories, or any other small business where three-phase power is needed and only a single-phase line is available.  The PHASE-O-MATIC is capable of operating an indefinite number of motors at full power from a single converter, which differs from static converters, that are restricted to operating a single motor at 60 % power.

The PHASE-O-MATIC can operate a single motor, or numerous motors, individually, concurrently, intermittently, or continuously as though connected to a three-phase line.  PHASE-O-MATIC permits a combination of motors to vary in horsepower, motor speed, duty cycle, instant reverse, and be started and stopped frequently with no effect on the converter.

The maximum size of a given motor is limited to the horsepower rating of the converter.  The TOTAL HORSEPOWER LOAD should not exceed 2-times the converter rating.  There are exceptions, where high speed (3450 RPM) motors, or squirrel cage fans are used.  For recommendations on converter sizing, please contact us with horsepower, RPM, amperage, and what the motor will operate.  Converters of 230 volts or 460 volts, 60 cycle in ratings from 5 to 60 horsepower are available.

PHASE-O-MATIC converters (Power Factor .96+) raise the power factor of the motor system, thereby lowering the effect of starting.  Amperage is reduced with the efficiency rotor, bringing three-phase motors up to speed with only a slight voltage drop.  The starting KVA of a three-phase motor connected to a PHASE-O-MATIC is about 30% less than the same motor operating on solid three-phase.  It has been observed that up to 50 HP motors on a medium loaded single phase, 7200 volt line, created virtually no flicked or disturbance.

To summarize, PHASE-O-MATIC enables you to operate as many three-phase motors as desired with the highest performance and efficiency expected from a three-phase line with less expense, a minimum of maintenance, and no adjustment or regulation.

a heavy duty unit a high performance method for generating high efficiency 3-phase power from single-phase power lines available for 230 or 460 VAC, 60 HZ power source will simultaneously operate a wide variety of 3-phase motor drive systems a low cost method of conversion, ideal for farms, factories, and small businesses available in sizes from 5 to 60 HP motor loads

BENEFITS

• Saves Money
• Operates numerous 3-phase motors at single phase power rates  
• Convenient
• Easy to install anywhere
• Pre-wired, ready to use
• Available for manual or can be wired for automatic start
• No adjustment, regulation or phase balancing required
• Dependable
• UL Listed (6L34) in the United States and Canada
• Performance
• Balanced output voltage
• Reliably handles instant reverse, shock loads, and multiple restarts
• No relays, transformers, or electrolytic capacitors
• High power factor operation  (.96+)



TYPICAL APPLICATIONS

Water & Irrigation Pumps Regular & MIG Welders CNC Machining Equipment Machine Tools

Compressors Grain Dryers Elevators High Power Fans

Warranty will be one year from date of purchase unless stated otherwise

The INSTALLATION AND OPERATING MANUAL is also available for your information.

Give us a call (1-800-400-3946), e-mail , or stop at Maloney Enterprises for more information on the many services we provide.

Top | Back | Forward

Site Created by "Clyde's Corner"